Epson SureColor XP15000
XP15KSE |
CARTRIDGE |
FORMULATION |
CYAN |
T312 |
XP15KSE-C |
MAGENTA |
T312 |
XP15KSE-M |
YELLOW |
T312 |
XP15KSE-Y |
PHOTOBLACK |
T312 |
XP15KSE-BK |
RED |
T314XL |
XP15KSE-R |
GREY |
T314XL |
XP15KSE-GY |
Note Tabs below to go to other areas
XP15K Signature Edition
The all round photoprinter from Epson to replace the legendary Artisan 1430. Epson warns that only genuine Epson supplies can be used on this printer. That was their intention but we have a refill solution to that and this printer is ideally suited to both the user just starting out and needs a refill solution to make their hobby affordable as well as the advanced enthusiast.
We highly highly recommend that the user only refill OEM tanks if they wish to have a good refill experience.
All tanks from Epson suitable for this printer are physically built identically. The only differences are in how much ink Epson decides to place in the printer and the chip that they install which must be coordinated with the printer. There are three variations on the tanks. Standard, Setup and XL sized tanks. The SETUP tanks included with the printer are perfectly suited to be refilled and has no compromises. It contains a little more ink than the standard and less than the XL size.
So in order to begin refilling, the user must first convert the printer so that the printer no longer wants to see a chip on the tanks. Once the printer has been reprogrammed by the purchased software to become chipless, user should immediately begin refilling their OEM tanks.
Two sizes of kits are provided. The 12 oz smaller kit has enough ink to provide approximately 8 equivalent standard sized tanks or approximately 4 equivalent XL tanks. The larger 24oz kits provides twice the amount of refills.